POGO®24 Position Chiller Block24位冷却模块、磁力架
中文English

Tel: 021-57652529

Mb: 13381606441

Mail: sales@rfunite.com

中文English

POGO®24 Position Chiller Block24位冷却模块

产品中心 > 自动化及附件 > POGO®24 Position Chiller Block24位冷却模块

POGO®24 Position Chiller Block24位冷却模块

POGO®24 Position Chiller Block24位冷却模块、磁力架

POGO®24 Position Chiller Block24位冷却模块 SKU: A000020

24 position tube block with integrated Spring Cushion Technology. Constructed of solid aluminum to facilitate temperature control when placed on a peltier or other temperature controlled device.

24位管块集成弹簧缓冲技术。构造的固体铝,以方便温度控制时,放置在一个peltier或其他温度控制装置。

Capture every microliter of precious reagents while avoiding tip crashes and occlusions using Alpaqua’s SBS-compliant tube block with integrated Spring Cushion Technology.

Each of its 24 positions is independently equipped with a spring-loaded tube support capable of moving a full 3 mm down to compensate for variations in Z-positioning of pipettors.

Position diameter of 10.90 mm and a depth of 35.25 mm when the supporting spring is fully compressed.

捕获每微升的珍贵试剂,同时避免尖端碰撞和闭塞使用Alpaqua的sbs兼容管块集成弹簧缓冲技术。

它的24个位置中的每一个都独立配备了一个弹簧加载的管支架,能够向下移动整整3毫米,以补偿移液器z定位的变化。

支撑弹簧完全压缩时,位置直径10.90 mm,深度35.25 mm。

POGO® Features

Solid aluminum for efficient cooling

24 tube capacity

Compatible with a variety of screw top vials & micro-centrifuge tubes

Spring Cushion Technology to maximize usage of reagents

Automation-friendly, SBS footprint

Integrated Spring Cushion Technology to Get That Last Drop

In many reagent kits screw cap vials are used to supply small volumes of enzymes and other precious reagents. These often need to be kept at a low temperature until used in assays. These reagents are typically supplied with very little surplus volume which presents a challenge for automation. Using conventional tube holders, pipettors need to be carefully programmed to find the bottom of the tubes – a complicated task when working with individual probes on most liquid handlers.

POGO®特性

固体铝,高效冷却

24管容量

与各种螺旋瓶和微离心管兼容

弹簧缓冲技术,最大限度地利用试剂

自动化友好,SBS占用空间

集成弹簧缓冲技术,获得最后一滴

在许多试剂试剂盒中,螺旋盖小瓶用于供应小体积的酶和其他珍贵试剂。这些通常需要在低温下保存,直到用于分析。这些试剂通常供应很少的剩余体积,这对自动化提出了挑战。使用传统的管架,移液器需要仔细编程以找到管的底部-当使用大多数液体处理器上的单个探针时,这是一项复杂的任务。

POGO provides an innovative solution to the positioning problem with each of its 24 positions independently equipped with a spring-loaded tube support  to compensate for variations in Z-positioning of pipettors and ensuring your ability to get that last microliter while avoiding tip crashes and occlusions.

POGO为定位问题提供了创新的解决方案,其24个位置都独立配备了弹簧加载管支撑,以补偿移液器z定位的变化,并确保您能够在避免尖端碰撞和堵塞的同时获得最后一微升。

姓名
电话号码
电子邮箱
公司名称
地址
留言*
 
验证码
提交
POGO®24 Position Chiller Block24位冷却模块、磁力架